HERE YOU CAN FIND SOME ANSWERS TO COMMON QUESTIONS
QUESTIONS ABOUT HOW THE ADDITIVE WORKS:
Fuel combustion is a complex chemical process. Each type of fuel has its own speed and principle of combustion. Also, it contains substances that have different combustion temperatures. Under normal engine operating conditions, some components, such as oil, may evaporate, reducing engine power. The task of the DT30 additive is to normalize the fuel combustion so that all substances in it have time to burn, producing additional power in the engine.
DT30 improves fuel economy, resulting in better engine performance.
DT30 decreases deterioration by reducing friction between parts and increasing the mileage between service visits.
The combustion temperature does not increase within the combustion chamber or the engine.
DT30 cleans the fuel supply system and improves the atomization of the injector.
No, DT30 does not cause corrosion within the fuel system.
No, DT30 is completely safe for the engine.
When using DT30, fuel combustion is more efficient and, as a result, exhaust smoke can be reduced. It is also necessary to take in account the quality of the fuel, the condition of the engine, the correct dosage of the additive, and other operating factors.
1. Fuel quality: If the original fuel is already of high quality or contains additives that improve combustion, then using the additive may be less noticeable.
2. Engine condition: The effectiveness of the additive may depend on the overall condition of the engine. If the engine is in good condition, the usage of the additive may be less noticeable than if used in less favorable conditions.
3. Operating conditions: Driving style, route, load and other operating conditions can also affect the results. For example, in a city driving with frequent stops and starts, the benefits of the additive may be more noticeable than on long highways.
4. Individual vehicle characteristics: Different types of vehicles may react differently to the additive. Efficiency may vary depending on engine design and the fuel injection system.
If you have any problems with fuel saving after using the additive, you should consult with a professional or the additive manufacturer to determine application suitability and usage recommendations.
QUESTIONS ABOUT EMISSIONS INTO THE ATMOSPHERE AND IMPACT ON THE HUMAN BODY
DT30 promotes more complete combustion of fuel, which reduces CO2 emissions into the atmosphere.
Yes, the additive is a low-hazard substance. DT30 is completely safe for a person when it is used for its intended purpose.
When using DT30, you should avoid contact with skin and eyes, follow storage instructions, and use in well-ventilated areas.
If the additive comes in contact with the skin or eyes, it is important to take appropriate steps immediately to prevent potentially harmful effects.
What to do in case of contact with skin:
1. Wash thoroughly: Immediately and thoroughly wash skin areas that have been in contact with the additive with plenty of water.
2. Use soap: If possible, use mild soap to clean your skin.
3. Remove clothing: If additive gets on clothing, remove it to prevent further contact.
What to do in case of contact with eyes:
1. Wash eyes well: Wash your eyes thoroughly, very gently with clean water for several minutes, keeping your eyelids open.
2. Don’t rub your eyes: To avoid additional irritation, don’t rub your eyes.
3. If you wear contact lenses, remove them before washing your eyes.
If symptoms continue or worsen:
— Seek medical attention immediately from a hospital or the nearest medical facility.
— Bring the packaging or information about the additive with you so that the doctor can correctly assess the situation.
Remember that if you are exposed to chemicals on your skin or eyes, reacting quickly can greatly reduce the risk of serious consequences.
If you accidentally drink DT30, it is important to follow these instructions immediately:
1. Don’t panic: Calmness can help you rationally decide what to do in this situation.
2. Rinse the stomach: Immediately rinse the stomach with plenty of water. This can be done by inducing a gag reflex or simply drinking plenty of water. Do not induce vomiting if this is contra-indicated for you for some reason.
3. Seek medical attention: Consult your doctor or call emergency medical services right away. When consulting a doctor, inform them that you have ingested a fuel additive.
4. Show the health care professional the packaging or information about the additive so that they can correctly assess the situation.
It is important to seek medical attention as soon as possible! Depending on the composition of the additive and the amount ingested, it may pose a health hazard.
GENERAL QUESTIONS:
For best results, use DT30 every time you fill your tank.
DT30 is compatible with most fuel additives, but it is better to use it alone for best results.
DT30 can be used in any vehicles running on either gasoline or diesel fuel.
Yes, since they usually have large diesel engines that generate electricity for traction electric motors.
To maintain the effectiveness and safety of the additive, it is recommended to:
– store in a cool and dry place.
– follow storage temperature recommendations.
– keep the container tightly closed.
– avoid exposure to direct sunlight.
Leaving DT30 in an open container will have negative consequences, such as evaporation, the possibility of contamination from the external environment, as well as danger to humans. These factors will lead to the loss of the additive’s properties. We recommend following the storage condition guidelines of DT30.